Open type hot nozzle: product design and good appearance of steel and accessories with Germany imported material, uniform heating, low cost, good appearance molding products. Can meet the glue into the style of the way.

Temperature control box can accurately control and display the temperature of hot runner components, long service life, easy operation.

Open beak: 1. Apply to a variety of plastic materials, the gate mark minimal. Not easy to wire drawing, color changing ability good. Gate area moderate temperature

Through the open nozzle (built-in nozzle tip): 1 not prone to problems such as drawing 2 easy processing, our gate can be processed, in order to meet the requirements of the cavity and the outlet 3 will be in the product or channel on the left a small nozzle material

Open mouth (no internal nozzle tip: 1. Injection molding flow large, can play an excellent packing effect to change color highlight 3. Easy processing, gate our processing, to meet the cavity and the outlet 4 will leave a short nozzle material in product or channel

Needle valve type nozzle: 1. Products into gum traces of small, suitable for various plastic materials. The gate size can be adjusting, to reduce shear heat and pressure loss by controlling the gate into order and time of gel, adjust product binding line position

Needle valve (outlet): 1. A short nozzle material in product or channel, applicable to a variety of plastic materials. The gate size can tune, to reduce shear heat and pressure loss by controlling the gate into order and time of gel, adjust product binding line position. Easy processing, our gate can be processed, in order to meet the requirements of the cavity and the outlet

The above is the detailed introduction of hot runner system including single eccentric, hot runner system, single eccentric price model